Our Products
-
Other categories Foamtec Conductive/Thermal Pad/Hook & Look / Felt
Other categories Foamtec Conductive/Thermal Pad/Hook & Look / Felt -
Thin films Foamtec PP Film/ PC Film / PET Film / Fish paper
Thin films Foamtec PP Film/ PC Film / PET Film / Fish paper -
rubbers Foamtec Poron / EPDM /CR/ NBR/ SBR / EVA
rubbers Foamtec Poron / EPDM /CR/ NBR/ SBR / EVA -
Adhesive tape Foamtec Double Adhesive / Direct coating
Adhesive tape Foamtec Double Adhesive / Direct coating -
spongacea Foamtec PU Foam / PE Foam /EPE Foam
spongacea Foamtec PU Foam / PE Foam /EPE Foam
About us
Industry classification
Die cutting forum
-
Porosity problems of foaming materials and general standards
2023-11-02 11: 27: 46 91Stomatal problem: Insufficient foam: This may be due to problems with the quality of the blowing agent, The expiration date has expired, The plasticity of the compound is too low, Placing time too long or high temperature causes foaming agent. . .
-
Technical sponge UL Standard
2023-11-03 10: 53: 00 101UL Standard technical foam refers to the standard for testing the surface combustion performance of technical foam products. Its test methods and ASTM E84 Basically the same, Mainly through the tunnel method. . .
-
Die-cutting products and applications in automotive wire harness coverings
2023-11-05 10: 48: 28 88Car harness covering, The main function of die-cutting products is to protect wire harnesses, It can also reduce noise, Shock absorption, waterproof, Improve light shading and other functions. Here are some common car lines. . .
-
Polyurethane foam gasket: Advantages and applications
2023-11-06 10: 46: 42 82For decades, Polyurethane has been the material of choice for many industries, Serves a wide range of applications. One of the key areas, Polyurethane has made a significant difference in gaskets. This material. . .
-
Technical points of bending products in die cutting
2023-11-09 10: 42: 49 82The depth of bending line has a great influence on the quality of bending products. The depth of the bending line is too shallow, It will cause insufficient bending, The product is easy to deform or break; The depth of the bending line is too deep, Will lead to. . .
-
dilate EPDM The application of foaming materials is explained
2023-11-10 10: 41: 16 85EPDM Foaming material is a kind of EPDM Foam material made of rubber, light, soft, Good elasticity, Thermal insulation, Sound insulation, waterproof, Aging resistance and other characteristics. More on this below. . .
-
The difference and application of silicone film and acrylic film
2023-11-13 10: 38: 38 80Silicone film and acrylic film are different in the following six aspects: stickiness: Acrylic has higher viscosity, There will be residual glue when you tear it off, Silicone, on the other hand, is less viscous, There is no residual glue after tearing. venting. . .
-
Foam tape die cutting and use of difficult solutions
2023-11-14 10: 27: 11 65The foam tape is too sticky, Easy to deform when pasting, You can try the following solutions: Control the paste temperature and humidity: The viscosity of foam tape is greatly affected by temperature and humidity, So in paste. . .
